Kingboan Lighting supplies flexible LED wall washer lights and supports customized decorative-lighting solutions for architectural, commercial, and landscape projects. For installations requiring a particular bend radius or cut length, we can review the design against the selected fixture construction, mounting route, optical requirements, and supporting components. Exact bend and cutting options are model-specific and should be confirmed before specification or ordering.

Custom Configuration for Curved Installations

Flexible wall washer lights are often used where a rigid linear fixture cannot follow the intended architecture. Typical applications include curved façades, columns, arches, landscape features, recessed outlines, and irregular interior details. The fixture must follow the installation path without exceeding its permitted mechanical limits or distorting the intended wall-wash effect.

A project drawing should distinguish the required bending direction as well as the tightest radius along the route. Side-bending and vertical-bending products are not automatically interchangeable, and the physical radius of the architecture may differ from the minimum safe radius of a particular fixture. Corners, transitions, mounting channels, and cable exits must also be considered rather than evaluating only the main curve.

Cut Length Is More Than a Dimensional Choice

Flexible LED wall washers generally have defined cutting increments based on their internal circuit architecture. A requested finished length therefore needs to be coordinated with the product’s permissible cut points, electrical load, connection method, and end treatment. Cutting at an arbitrary point can affect operation and may compromise the housing or environmental protection.

Optical continuity is another consideration. The final configuration should account for fixture spacing, dark gaps at joints, beam orientation, and the distance between the light source and the illuminated surface. For multi-section installations, power supplies, controllers, cables, connectors, and mounting accessories should be planned as one compatible system.

Project Information Needed for Configuration Review

To assess a flexible wall washer configuration efficiently, provide:

• Installation geometry: drawings or dimensions showing curves, corners, and the required bending direction.
• Required lengths: finished dimensions for each run, including cable-entry and connection positions.
• Lighting objective: wall-washing or grazing effect, illuminated surface, fixture setback, and preferred light direction.
• Operating conditions: indoor or outdoor placement and any exposure to water, sunlight, moisture, or corrosive conditions.
• System requirements: voltage, color or control needs, power-feed arrangement, and compatible accessories.

Kingboan Lighting works with designers, architects, and engineering buyers on standardized and customized LED decorative-lighting requirements. Send the project drawing and target segment lengths through our official website at https://www.kingboansz.com/ so we can review the appropriate flexible wall washer construction, feasible bend radius, cutting increments, and system components for the installation.